W5500S2E-S1
- Support RS-485 enable pin of an external RS-485 transceiver
- Support Modbus RTU/ASCII to Modbus TCP/UDP
- Support Modbus over TCP/UDP
- Baud rate can be set between 1.2kbps~1.152Mbps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management and firmware upgrades
- Dimension (L×W×H): 34x24x12.4(mm)
W7500S2E-S1
- Support RS-485 enable pin of an external RS-485 transceiver
- Baud rate can be set between 300bps~460,800bps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management
- Dimension (L×W×H): 34.0×24.0x12.4(mm)
W5500S2E-Z1
- Support RS-485 enable pin of an external RS-485 transceiver
- Support Modbus RTU/ASCII to Modbus TCP/UDP
- Support Modbus over TCP/UDP
- Baud rate can be set between 1.2kbps~1.152Mbps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management and firmware upgrades
- Dimension (L×W×H): 44.5×31.7×15.75(mm)
W5500S2E-R1
- Support RS-485 enable pin of an external RS-485 transceiver
- Support Modbus RTU/ASCII to Modbus TCP/UDP
- Support Modbus over TCP/UDP
- Baud rate can be set between 1.2kbps~1.152Mbps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management and firmware upgrades
- Dimension (L×W×H): 44.5×31.7×23(mm)
W7500S2E-R1
- Support RS-485 enable pin of an external RS-485 transceiver
- Baud rate can be set between 300bps~460,800bps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management
- Dimension (L×W×H): 44.5×31.7×23(mm)
W7500S2E-Z1
- Support RS-485 enable pin of an external RS-485 transceiver
- Baud rate can be set between 300bps~460,800bps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management
- Dimension (L×W×H): 44.5×31.7×15.75(mm)
W7500S2E-C1
- Hardwired TCP/IP MCU with Serial-to-Ethernet firmware
- Support RS-485 enable pin of an external RS-485 transceiver
- Baud rate can be set between 300bps~460,800bps
- Support TCP Server, TCP Client and UDP three operating modes
- Support Serial AT command and PC configuration tool configuration
- Built-in Web server for remote device management
- Built-in MAC address which is ready to connect to the Internet
- Dimension: 7×7(mm)